Features
ECO2 FINAL FINISH™ is a silica sand-free, fast-setting/fast-curing, ultra-smooth and fine, polymer-modified calcium aluminate cement-based skimcoating and patching compound. The product is used to skim-coat surfaces and fill cracks, depressions, voids and holes in substrates up to 1/2″ (12 mm) deep and can also be used as an embossing leveler.
Green Features
- 100% silica sand-free
- 14% recycled content (1.4 lb per 10 lb bag)
- pH 11 in wet-state (eco-friendly for installers)
- Solvent-free – no VOCs
- Improves indoor air quality compared to Portland cement-based products
- Will not promote mold, mildew or bacteria growth
- Meets California Department of Public Health CDPH/EHLB/Standard Method Version 1.2, 2017 (Emission testing method for CA Specification 01350)
- Contributes to LEED® and WELL® objectives and requirements
Performance Features
- No change to installation method
- No increase to project cost
- ULTRA-FAST SETTING: install flooring after only 15 – 20 minutes (as a skim-coat)
- Ultra smooth and fine skim-coat
- Apply from featheredge up to 1/2″ (12 mm) in a single application
- Up to 4 times the coverage of traditional patching compounds
- Hydraulic Calcium Aluminate cement (just add water)
- Usable over concrete and exterior-grade plywood surfaces
- Performance exceeds requirements for interior institutional, commercial and residential applications
- Accepts all setting materials, adhesives, and floor coverings
- Can be applied over substrates up to 95% RH per ASTM F2170
- Blocks pH on substrates with up to 90% RH when installed at 3/16″ thickness or greater
Packaging
10 lb (4.54 kg) bag
