Features
ECO2 LEVEL™ is a solvent-free high performance calcium-aluminate cement based self leveler that is fast curing, self drying, self finishing, and highly polymer-modified. It can be poured or pumped to correct, level, and smooth substrates from a feathered edge up to 1 1/2″ neat or up to 5″ with aggregate.
Green Features
- 100% silica sand free
- 75% recycled content (53% Pre-consumer, 22% Post-Consumer – 37.5 lb per 50 lb bag)
- pH 10 in wet-state (eco-friendly for installers)
- Solvent-free – no VOCs
- Will not promote mold, mildew or bacteria growth
- Use with ECO2 MMS/MMS RAPID™ + ECO2 AGGREGATE™ as a complete “green” system to protect finish flooring from moisture up to 100% RH as per ASTM F-2170
- Contributes to LEED® and WELL® objectives and requirements
- LEED v4 Health Product Declaration v2.1
- LEED v4 Certificate of Recycled Content
Performance Features
- No change to installation method
- No increase to project cost
- Pour from a feathered edge up to 1 1/2″ neat and 5″ with aggregate (continuous pours must be a minimum of 1/8″ depth)
- Install porous flooring systems in 3-4 hours
- Install non-porous flooring systems 16-24 hours
- Hydraulic Calcium Aluminate cement (just add water)
- Usable over concrete and exterior-grade plywood surfaces
- Performance exceeds requirements for interior institutional, commercial and residential applications
- Accepts all setting materials, adhesives, and floor coverings
- Can be barrel mixed or pumped
- Can be used as a thermal mass over hydronic and electric radiant heating systems
- Can be applied over substrates up to 95% RH per ASTM F2170
- Blocks pH on substrates with up to 90% RH when installed at 3/16″ thickness or greater
- Light duty wear surface (foot traffic, protective sealer recommended)
ECO2 LEVEL is also available in lightweight and low-prep formulations.
Packaging
50 lb (22.7 kg) bag
